This topic has been archived. It cannot be replied.
-
枫下家园 / 电脑电信 / FPL家庭电话设置求助。申请了FPL电话,买了Linksys PAP2T,照着FPL网站指导设置完。能接也能打。对方能听见我,我却听不见对方。bell网络下载上传实测15M7M。bell的猫集成无线路由。是什么设置不对么?先谢了。
-baishan(baishan);
2013-4-9
(#8142622@0)
-
自己顶一下。是按着这个设置的。http://forum.fongo.com/viewtopic.php?f=15&t=310。在Ipad上也注册了一个fongo的号码,这个号码和家里电话之间通话就什么问题都没有。Ipad上的号码和别的号码之间通话也没问题。家里电话就听不见对方的声音,一点都听不见。
-baishan(baishan);
2013-4-11
(#8145087@0)
-
感觉是bell的猫的问题。找朋友借一个router放在猫和Adapter之间试试。
-winterfish(潜水鱼);
2013-4-11
(#8145307@0)
-
像是语音流NAT穿透的问题。找个软电话,比如zoiper,sjphone,xlite先试试就知道了,因为软电话的NAT穿透远好于硬电话
-akoei(停车**枫林晚);
2013-4-11
(#8145934@0)
-
看看以下几个设置Recommended Settings
STUN/ICE: Disable
NAT Mapping Enabled: Yes
NAT Traversal: Enable sending Keep-Alives only:
on Grandstream HT-701 ATAs this setting is “no, but send keep-alive”
Keep Alive Message: NOTIFY or a UDP PING Packet
For Linksys/Cisco devices, use ‘Nat Keep Alive Msg’ = $NOTIFY or $PING
Never use REGISTER as your Keep Alive message
-winterfish(潜水鱼);
2013-4-11
{366}
(#8146026@0)
-
你说的那些是注册振铃的问题。RTP流的NAT穿透一般使用stun或ice什么的。lz的典型单向穿透,语音穿出没有问题,进来的遇见NAT就出问题了。有时换个路由器能好些,但大多数情况下高级路由器会更糟。
-akoei(停车**枫林晚);
2013-4-12
(#8148152@0)
-
你说的有道理,我记得好像见过这个问题跟Bell的猫有关,但是找不到出处了。上FPL的论坛搜索一下吧。
-winterfish(潜水鱼);
2013-4-13
(#8148380@0)
-
旧贴里有这个问题。 就是没有打开一些ports
-ysysning(樱桃三果);
2013-4-12
(#8148204@0)
-
来汇报一下。问题是原来在Proxy内按他们指导填写的voip.freephoneline.ca. 改成208.65.240.160,就打进打出都正常了。通话效果还是很好的。
-baishan(baishan);
2013-4-14
(#8150594@0)