本文发表在 rolia.net 枫下论坛Originally Posted by Keas
ok i thought everyone was having the remote issue with start up. this is the first time i have heard someone say they have one that actauuly works when they turn the tv on. what date is your tv or does it matter? mine is nov 06.
i really hate to return the tv for another viewsonic about this but it is driving me mad especially when i need the volume down. do you guys think it is a remote issue or the tv? i am wondering if i asked for just a new remote if it would work.
i finally got into the 991 settings and honestly didnt understand alot of them. could anyone give a breif explanation of each? also by changing the values in the 6500,9500,xxxxx temps will that be saved and work when i chose a setting like movie mode or does changing any of the setting later turn these back to default?
i remember looking at settings on a previous post (688or there abouts) and will relook at them but again understanding what i am doing helps instead of just punching in numbers.
thanks for all the help so far
=====================================================================
1) Its most likely a remote issue from my guess. Mine is Dec 06 build. Make a note for future reference, (it will happen trust me, its just the matter of time), your remote will go dead on you out of nowhere. Turn the TV on with the TV itself, press and hold the TV button for 5 secs on the remote, 0, 0, 0, 0. Now youre remote comes back to life.
2) The 991 service menu. Note: When using this and want to go back to the default menu, you have to power off/on the tv to get it. Go to adv. pic adjustment, and turn everything off (except the DNR which I leave at high, but thats personal pref). Also set the colour mode to the highest one - if I remember correctly its 110,000? After selecting that colour mode, it will bring you into the RGB colour pallette. This is where you beef up the RGB panel (makes a huge difference, like night and day).
Again, this is all personal preference) I like my display bright and vivid so I run all RGB levels on 175 each. If I recall, out of the box its like at 80? Very very weak settting, thats why the picture quality out of the box is so flat. Anyways bring it up to at least 120-150. Will make the picture come to life. Now, you have to do this with every single output you will be using. So if you will be using the VGA mode, component and HDMI, you have to repeat these steps in every single one of those modes. Be sure to adjust the RGB pallette in the colour temp option to the same levels you have in the 110,000 mode. I have no idea why Viewsonic put two options for having to adjust RGB levels, but not a biggie because once its set you wont ever have to muck around with it again.
Gamma I leave on middle and I dont touch anything else in the 991 menu.更多精彩文章及讨论,请光临枫下论坛 rolia.net
ok i thought everyone was having the remote issue with start up. this is the first time i have heard someone say they have one that actauuly works when they turn the tv on. what date is your tv or does it matter? mine is nov 06.
i really hate to return the tv for another viewsonic about this but it is driving me mad especially when i need the volume down. do you guys think it is a remote issue or the tv? i am wondering if i asked for just a new remote if it would work.
i finally got into the 991 settings and honestly didnt understand alot of them. could anyone give a breif explanation of each? also by changing the values in the 6500,9500,xxxxx temps will that be saved and work when i chose a setting like movie mode or does changing any of the setting later turn these back to default?
i remember looking at settings on a previous post (688or there abouts) and will relook at them but again understanding what i am doing helps instead of just punching in numbers.
thanks for all the help so far
=====================================================================
1) Its most likely a remote issue from my guess. Mine is Dec 06 build. Make a note for future reference, (it will happen trust me, its just the matter of time), your remote will go dead on you out of nowhere. Turn the TV on with the TV itself, press and hold the TV button for 5 secs on the remote, 0, 0, 0, 0. Now youre remote comes back to life.
2) The 991 service menu. Note: When using this and want to go back to the default menu, you have to power off/on the tv to get it. Go to adv. pic adjustment, and turn everything off (except the DNR which I leave at high, but thats personal pref). Also set the colour mode to the highest one - if I remember correctly its 110,000? After selecting that colour mode, it will bring you into the RGB colour pallette. This is where you beef up the RGB panel (makes a huge difference, like night and day).
Again, this is all personal preference) I like my display bright and vivid so I run all RGB levels on 175 each. If I recall, out of the box its like at 80? Very very weak settting, thats why the picture quality out of the box is so flat. Anyways bring it up to at least 120-150. Will make the picture come to life. Now, you have to do this with every single output you will be using. So if you will be using the VGA mode, component and HDMI, you have to repeat these steps in every single one of those modes. Be sure to adjust the RGB pallette in the colour temp option to the same levels you have in the 110,000 mode. I have no idea why Viewsonic put two options for having to adjust RGB levels, but not a biggie because once its set you wont ever have to muck around with it again.
Gamma I leave on middle and I dont touch anything else in the 991 menu.更多精彩文章及讨论,请光临枫下论坛 rolia.net