对于1998 – 2000 OBD enabled light vehicle
有以下之一即失败。
Vehicle OBD computer is unable to communicate with OBD
emissions test unit.
3 or more supported readiness monitors not set to “Ready”.
MIL is commanded “ON” with DTC(s).
For a vehicle submitted for re-testing after an initial fail and repairs,
the monitor(s) that were associated with initial failure must be set to
“Ready”.
对于2001 & later OBD enabled light vehicle
有以下之一即失败。
Vehicle OBD computer is unable to communicate with OBD
emissions test unit.
2 or more supported readiness monitors not set to “Ready”.
MIL is commanded “ON” with DTC(s).
For a vehicle submitted for re-testing after an initial fail and repairs,
the monitor(s) that were associated with initial failure must be set to
“Ready”.
有以下之一即失败。
Vehicle OBD computer is unable to communicate with OBD
emissions test unit.
3 or more supported readiness monitors not set to “Ready”.
MIL is commanded “ON” with DTC(s).
For a vehicle submitted for re-testing after an initial fail and repairs,
the monitor(s) that were associated with initial failure must be set to
“Ready”.
对于2001 & later OBD enabled light vehicle
有以下之一即失败。
Vehicle OBD computer is unable to communicate with OBD
emissions test unit.
2 or more supported readiness monitors not set to “Ready”.
MIL is commanded “ON” with DTC(s).
For a vehicle submitted for re-testing after an initial fail and repairs,
the monitor(s) that were associated with initial failure must be set to
“Ready”.